DENON hfe denon dvd-2900 service free download

File name hfe_denon_dvd-2900_service.pdf

For U.S.A., Canada, Europe & Japan model Ver. 2 SERVICE MANUAL MODEL DVD-2900 DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER For purposes of improvement, specifications and design are subject to change without notice. Please use this service manual with referring to , the operating instructions without fail. Some illustrations using in this service manual are slightly different from the actual set. 16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034 JAPAN Telephone: 03 (3837) 5321 X0168V.02 DE/CDM 0304 DVD-2900 2 SAFETY PRECAUTIONS LEAKAGE CURRENT CHECK LASER RADIATION 500V 1M (1) (2) (1) (2) 2 DVD-2900 3 DISASSEMBLY (Follow the procedure below in reverse order when reassem- bling.) 1. Top Cover (1) Remove 10 screws on the top and both sides, and 2 screws on the rear. (2) Widen the Top Cover a little laterally, then detach it with sliding in the arrow direction. 2. Loader Panel, Front Panel 2.1. When the Disc Tray can be ejected electrically (1) After removing the Top Cover, proceed as follows. (2) Plug the power cord to the wall outlet, switch on the pow- er, and press the "OPEN/CLOSE" button to open the Disc Tray. (3) Detach the Loader Panel by lifting it in the arrow direc- tion. (4) Press the "OPEN/CLOSE" button to close the Disc Tray, then unplug the power cord. (5) Disconnect the wire (CX025, CX061) connecting the Front Panel's P.W.B. and the power PWB in the Chassis. (6) Remove 4 top screws and 4 bottom screws, then detach the Front Panel to the arrow direction. (7) Disconnect the FFC (CX171) connecting the Front Pan- el's P.W.B. and the main P.W.B. in the Chassis. 3 DVD-2900 4 2.2. When the Disc Tray cannot be ejected electri- cally (1) After removing the Top Cover, proceed as follows. (2) Insert a screwdriver(-) into the left hole of the Mecha. Fix Bracket, and push the Plate Gear of the DVD Mecha. slowly to open the Disc Tray. (3) Remove the Loader Panel, and close the Disc Tray. (4) Detach the Front Panel following the same steps de- scribed on the previous page 1.